我的佳能A70现无法开机镜头收不回来.在左下角显示E18代码资料库

回答

我收集的材料，不知道对你有用否： “E18”bug：首先让相机自动关机，然后镜头朝正下方。然后开机，再关机。过大约5秒之后LCD上面就会出现E18提示。有些用户在浏览照片时，操作很快，而正好自动缩回镜头时会出现E18。转变摄影模式时偶尔会在LED屏左下角有E18错误码跳出来并且“滴滴”叫，同时死机，重新开机后又正常。网友hellhammer在佳能美国的网站找了找，答案如下： Error Code "E18" (Lens unit/Lens barrier error) When a camera error occurs， an error code like "Exx" will be displayed， where the x‘srepresent numbers. The "E18" error code indicates an error that involves the lens unit or lens barrier. Or it may appear if you apply pressure to the area surrounding the lens while handling the camera. Solution: Check the following when you operate the camera to avoid applying pressure to the lens and surrounding area: -Hold the camera so that your fingers do not touch the lens unit when you are shooting. -Make sure the camera is off before you put it back in the soft case. If you cannot clear the error code by turning the camera off and then on again， or if the error code is displayed frequently， a camera malfunction may have occurred. Please contact the retailer where you purchased the camera or the nearest Canon service center. 也就是开机状态那个镜头根本不能碰，碰出毛病了就只有拿去修。唉～～怎么其他型号的机子没听说有这个毛病啊。网站给了唯一一个解决办法： Occasionally， the error detected may be an isolated or intermittent instance. To check this， remove the battery for about 20 minutes， then reinsert the battery to see if the error code will reset. 说：有些时候，这个错误会单独而间歇发生，检查的方法是，先把电池卸下大约20分钟，然后重新插入机身看错误字符会不会再出现。解释对于用户预防和处理E18错误没有太大的实际作用。针对此问题，不少网友针对这个问题做出了购买镜头转接环与加UV镜的防护办法。虽然话题有些老了，但是希望能对最近要购买A70的朋友们有用处。参考文献：IT业界