【通告】D70 固件升级Firmware A/B Update 2.0!!!
-
1楼
-
2楼
release.txt里的内容
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Issues addressed with D70 A and B firmware version 2.00
The following changes have been made.
Problems corrected with the new firmware
?Performance of the 5-area AF system has been improved (Dynamic area and Closest subjct AF-area modes).
?Changes have been made to the design of menu displays.
?Page-size settings can now be applied from the camera with direct printing from a PictBridge-compatible printer.
?The number of exposures remaining, displayed in the control panel and viewfinder, when shooting at an image-quality setting of NEF (RAW) or NEF+JPEG Basic has been changed (the number is calculated based on the size of compressed RAW file).
Maximum number of exposures displayed when a 256-MB CompactFlash memory card is used:
Version 2.00: NEF (RAW): approx. 44 exposures; NEF+JPEG Basic: approx. 39 exposures
Version 1.03 or earlier: NEF (RAW): approx. 23 exposures; NEF+JPEG Basic: approx. 21 exposures
?The default setting for camera clock has been changed from 2004.01.01 to 2005.01.01. Now you cannot set the clock back to a date before 2004.12.31.
?A problem that sometimes caused communication between the camera and computer to be unexpectedly terminated when using Nikon Capture Camera Control has been corrected. (Windows) -
3楼
大概的升级内容：
1、提高了5点对焦系统的性能(这个比较有用)
2、菜单改进了(这个无所谓)
3、通过PictBridge直接连接打印机打印时可以在相机上设置页面尺寸了(这个也用不大到)
4、拍摄NEF时剩余张数显示按照压缩过的文件大小计算，更加准确了(这个愚蠢的问题终于改正了，谢天谢地)
5、相机的默认时间从2004.01.01变为2005.01.01，只能设置2005年以后的时间了(小改动)
6、修正了一个使用Nikon Capture Camera Control连接相机时连接会意外中断的Bug(这个用得也不多，没碰到过)
升级效果还需观察……
另外，按照Readme的说法，注意A,B分别升级，先A后B(也许这个顺序无所谓，但是Readme是这么写的)，为了保证无误，复制升级文件前最好先Format一下CF卡消除任何可能的干扰。电池一定要足哦 -
4楼
这是以前升级的具体步骤（同样也适合本次升级）：不管怎么样说，升级肯定会有好处的~~~~~~~~~~
解开之后会找到BD700103.bin文件。
（windows 2000或xp）：
1、先在d70菜单把CF卡格式化一遍，然后在设置页里，把usb模式设成mass
2、d70装入cf卡，连上电脑，电脑会提示找到mass device。（其实用读卡器读上去也行）
3、把BD700103.bin拷贝到电脑找到的mass device根目录下面。
4、断开d70与电脑的连接
5、进入d70菜单，到设置页，查看固件版本，会看到最下面多了一项“升级固件”，选升级，在升级没有完成之前，不要关闭相机。建议用充饱的电池。
6、完成后，关机再开机。
7、最后会看到已经两个固件分别升级成了A1.01和B1.03。 -
5楼
-
6楼
-
7楼
-
8楼
-
9楼
